Metallized Polyester Film Capacitors (Radial)


Metallized Polyester Film Capacitors

DMR Series

        

Description :
The DMR is non-inductively wound using a metallized polyester film dielectric/electrode with radial leads and a moisture resistant epoxy resin coating.
 
Applications :
  • Widely uesd in communication, industrial and general electronic equipment
  • Suitable for charge/discharge, low voltage power, spark killer circuits,and circuit applications below 10 KHZ.
 
Features :
  • Self-healing characteristics provide stability and long life
  • Excellent electrical characteristics
  • Smaller size
  • Economical
General Specification :
  • Dielectric strength: 150% of the rated voltage for 1-5 sec.
  • Dissipation Factor: 0.8% max at 1KHZ 25
  • Insulation Resistance :
      

R.V.
Size
Cap.
100 VDC 250 VDC 400 VDC
W H T P W H

T

P

W H T P
0.01             10.5 7.5 4.5 7.5 0.6 10.5 7.5 4.5 7.5 0.6
0.012           10.5 7.5 4.5 7.5 0.6 10.5 7.5 4.5 7.5 0.6
0.015            10.5 7.5 4.5 7.5 0.6 10.5 7.5 4.5 7.5 0.6
0.018           10.5 7.5 4.5 7.5 0.6 10.5 7.5 4.5 7.5 0.6
0.022            10.5 7.5 4.5 7.5 0.6 10.5 8.0 5.0 7.5 0.6
0.027             10.5 7.5 4.5 7.5 0.6 10.5 8.0 5.5 7.5 0.6
0.033           10.5 7.5 4.5 7.5 0.6 10.5 9.0 6.0 7.5 0.6
0.039           10.5 7.5 4.5 7.5 0.6 12.5 8.5 5.0 10.0 0.6
0.047           10.5 7.5 4.5 7.5 0.6 12.5 8.5 5.5 10.0 0.6
0.056            10.5 8.0 5.0 7.5 0.6 12.5 10.0 5.5 10.0 0.6
0.068            10.5 8.0 5.0 7.5 0.6 12.5 10.5 6.0 10.0 0.6
0.082            10.5 8.0 5.0 7.5 0.6 12.5 11.0 6.5 10.0 0.6
NEXT